| Labor- per man hour | $35 |
| Labor- per machine hour | $60 |
| Re-assembly of firearms (labor only) | 45 |
| Diagnosing | $45 |
| Written appraisals – (per gun) | $25 |
| Field strip and clean | $30 |
| Deep Clean Service | $80 |
| Deep Clean Service – Double Barrel Shotguns | $100 |
| Law Enforcement Inspection | $35 |
| Barrel | Prices |
| Check Headspace | $25 |
| Remove stuck fired case*** | $50 |
| Remove live round*** | $100 |
| Remove bore obstruction*** | $50 |
| Install pre-threaded / short chambered barrel | $225 |
| Lap bolt lugs | $65 |
| Install Sako or m-16 extractor (Includes parts) | $180 |
| Install muzzle brake or suppressor on pre-threaded barrel | $35 |
| Install Aftermarket triggers with setting* | $75 |
| Action | Prices |
| Action Job Bolt Gun 1 Hr labor | $125 |
| Action Job Lever Gun 2 Hr labor | $175 |
| Action Job Revolver Gun 1.5 Hr labor | $150 |
| Trigger job Lever gun 1.5 hours | $125 |
| Cerakote | Prices |
| Scope (Solid)***** | $200 |
| Scope (Pattern)***** | $250 |
| Scope Base / Iron Sights (Each) | $25 |
| Scope Base / Iron Sights (1 piece Cantilever) | $65 |
| Small Parts (Solid) | $65 |
| Scope Rings (Solid) | $25 |
| Scope Rings (Pattern) | $60 |
| Magazine (Solid) | $40 |
| Magazine (Pattern) | $65 |
| Custom or specialized work | Call for Quote |
| Semi-Auto Rifle – 1 Color | $350 |
| Semi-Auto Rifle – 2 Color | $415 |
| Semi-Auto Rifle – Intricate/Camouflage pattern (Freehand)*** | $500 |
| Semi-Auto Rifle – Intricate/Camouflage pattern (Stencil)*** | $550 |
| Stock / Forend / Grip AR/AK Set- 1 Color | $200 |
| Stock / Forend / Grip AR/AK Set – 2 Color | $265 |
| Stock / Forend / Grip AR/AK Set – Intricate/Camouflage pattern (Freehand)*** | $300 |
| Stock / Forend / Grip AR/AK Set – Intricate/Camouflage pattern (Stencil)*** | $350 |
| Pistol Slide only – 1 color | $100 |
| Pistol Slide only – 2 color | $175 |
| Pistol Slide only – Intricate/Camouflage pattern (Freehand) | $200 |
| Pistol Slide only – Intricate/Camouflage pattern (Stencil) | $185 |
| Handgun – 1 Color | $200 |
| Handgun – 2 Color | $250 |
| Handgun – Intricate pattern | $200 |
| Specialized finish – Metallic , pearl, iridescent over Cerakote | $65 |
| Clear (Gloss or Matte) over existing Cerakote or hydro dipping work | $100 |
| Micro slick bolt or carrier group (Black) | $35 |
| Suppressor (1- color) | $65 |
| Suppressor (Multi-color) | $85 |
| Standard Long gun – 1 Color (All metal parts – No stock) | $200 |
| Standard Long gun – 2 Color (All metal parts – No stock) | $265 |
| Standard Long gun – Intricate/Camouflage pattern (Freehand) (All metal parts – No stock)*** | $300 |
| Standard Long gun – Intricate/Camouflage pattern (Stencil) (All metal parts – No stock)*** | $350 |
| Standard Long gun – 1 Color (Stock only) | $100 |
| Standard Long gun – 2 Color (Stock only) | $150 |
| Standard Long gun – Intricate/Camouflage pattern (Freehand) (Stock only)*** | $175 |
| Standard Long gun – Intricate/Camouflage pattern (Stencil) (Stock only)*** | $200 |
| Handgun | Prices |
| Trigger Job – Single Action Revolver | $95 |
| Trigger Job – Double Action Revolver | $145 |
| Straighten crane on revolver | $50 |
| Install ball detent- crane lock | $80 |
| Remove or modify hammer spur | $50 |
| Grip reduction | $195 |
| Aftermarket Trigger Install*** | $100 |
| Polish feed ramp (Estimate available per job) | $65 |
| Open and modify ejection port (Requires refinish, additional cost) | $80 |
| Stipple Frame (Requires refinish, additional cost) | $150 |
| Custom slide modification (Estimate available per job depending on work) | $120 |
| Fit custom slide (Labor only)*** | $175 |
| Rear dovetail non-standard (Starting at) | $75 |
| Polymer frame stippling standard | $100 |
| Undercut | $40 |
| Double undercut | $65 |
| Laser Engraving | COMING SOON |
| Metal | Prices |
| Bluing – Reblue (Matte) | $200 |
| Bluing – Reblue (Standard Finish) | $200 |
| Bluing – Polished Blue | $200 |
| Bluing – Belgian Bluing*** | call for pricing |
| Bluing – Slow Rust Bluing/Browning | $ 350 |
| Restoration – (Estimate available per job at hourly rate) | Call for Estimate |
| Bluing – Parkerizing – Handgun*** | $250 |
| Bluing – Parkerizing – Longun*** | $250 |
| Muzzle Brakes | COMING SOON |
| Plating | COMING SOON |
| SAR Work | Prices |
| Standard Maintenance rebuild – (Includes gas rings and springs) | Call for Quote |
| Install trigger, test fit and function (Labor only) | Call for Quote |
| Install forend (labor only) | Call for Quote |
| Assemble complete upper*** | Call for Quote |
| Tune Gas Port | Call for Quote |
| Shotgun | Prices |
| Change front of mid sight bead* | $35 |
| Polish chamber | $60 |
| Open or modify chokes (Non-plated bore) | $80 |
| Install screw in chokes (Non-plated bore – labor only) | $120 |
| Port Barrel (Each) | Coming Soon |
| Re-fit hinge pin and lug*** | $300 |
| Sight | Prices |
| Sight Work – Sight In (Plus Ammo) | $125 |
| Sight Work – Bore Sight | $30 |
| Sight Work – Drill and Tap (Per Hole using Forster Fixture) | $45/per hole |
| Install front Sight – Screw on w/ drill & Tap | $80/per hole |
| Barrel Band Install (+desired parts) | $150 |
| Cut slide for standard sights | $100 plus labor |
| Install sights w/o machining | $65 |
| Install center bead / includes drill and tap | $60 |
| Mount and Bore Sight | $65 |
| Lap Rings | $55 |
| Cut and lap rings | $150 |
| Slide Alterations | Call for Information |
| Stockwork | Price |
| Refinish – Standard (Hand Rubbed Oil) | $275 |
| Refinish – Filled (Hand Rubbed Oil)*** | $350 |
| Refinish – Spray on lacquer or Urethane*** | $175 |
| Fit wood or Synthetic inletted stock in addition to bedding costs | $100 |
| Install cross bolts (labor only) | $125 |
| Install recoil pad (+cost of desired style of recoil pad) | $80 |
| Install adjustable butt plate (+desired parts) | $200 |
| Sling swivel labor (Standard studs) – Parts additional cost | $25 |
| Sling swivels labor (Flush Mount) – Parts additional cost | $50 |
| Sling Swivels labor (Island Style) – Parts additional cost*** | $60 |
| Recoil reducer – No drill | $40 |
| Recoil reducer – drill stock and install – + cost of reducer | $100 |
| Recoil reducer – Graco or similar style | $225 |
| Repair cracked / Broken stock (Base price)*** | $100 |
| Install forend tip (Labor only)*** | $100 |
| Reshaping stock (Estimate available per job) | Call for estimate |
| Test Fire (all firearms are test fired) | Prices |
| Standard Ammo | $15 |
| Exotic Ammo* (Some cartridges will be quoted per round) | $20 |
Copyright © God and Gunsmoke LLC